Vega LM-1, User Manual, Page: 21 / 29

Vega LM-1 / User Manual
21
Revision 05 – 15 April 2019
“ VEGA LM-1 ” TAB
The “ Vega LM-1 ” tab contains the settings of the connected device.
Current state – displays the current parameters of the device - the temperature, the
battery level, the accelerometer and GNSS module states, latitude and longitude, the number
of visible and used satellites and the angel of deviation from the vertical.
Data transmission settings – allows to set up the periods of data accumulation and
transmission for both submodes – the “Static” and the “Movement”.
Guard settings – allows to set the parameter “Generate alarm event at movement
start”. If the checkmark is presence, then the alarm message will send at the LoRaWAN
network each time the device will switch from “Static” to the “Movement” submode.