Vega BS/User Manual
31
Revision 15 – 20 November 2018
Phone = *99#
Password = beeline
Username = beeline
where "internet.beeline.ru" is APN cellular operator. Change APN value according to APN
cellular operator using by the gateway.
In that example shown 3G setting for Beeline cellular operator
You need to change those values to others, which are necessary to your
own case
If the strings correspond to the figure above, you do not need to change anything. If
these strings are not present, then you should to add them. At that, strings
Init1 = AT+CPIN?
Init2 = AT+CGDCONT=1,"IP","internet.beeline.ru"
are entering instead string
Init = AT+CGDCONT=1,"IP","internet.beeline.ru"
The last three strings of the file specify the required dial-up phone, user name and
password (different for each cellular operator):
Phone =
*99#
Password =
beeline
Username =
beeline
Password and Username fields could not be are empty, if those parameters
are not used by the cellular operator, then you may to enter ‘internet’ word at
both fields for example
