EN|ENGLISH
9
To activate the tool, simply click on the switch (position 8, Figure 8). To turn
off the machine release the switch (position 8,9).
ATTENTION!
As soon as the dutch worked, immediately turn off the machine. This will
allow You to avoid overload of the motor.
The work of a jackhammer
Put the lever mechanism of the shock to the "bit". Keep the car firmly with
both hands. Turn on the machine and apply a slight effort to keep the
machines in the selected impact location. Much pressure on the drill is not
necessary, since it does not give the best results.
Fig. 10
Depth stop
Depth stop is used for drilling holes of uniform depth. Loosen the clamp
button, located on tire side of the handle and insert tire depth gauge into the
hole at the base of tire clamp. Adjust the depth stop to the desired depth and
tighten tire clamp button.
CARE OF TOOLS
Cleaning
Engine running (when you press tire switch) blow dirt and dust from all the
vents.
External plastic parts can be cleaned with a damp cloth and light detergent.
Never use a solvent.
ATTENTION!
Prior to the use of cleaning solutions, disconnect the tool from the network.