Deep fryer
14
"
Set the thermostat switch at 0.
"
Turn the switch 1/0 (0).
Both pilot lights are switched off.
The appliance is off.
"
Remove the residue from the oil.
"
Unplug the appliance from the socket.
6.4 Faults/fault repair
6.5 Placing out of operation
When the appliance is not being used:
"
Set the thermostat switch at 0.
"
Turn the switch 1/0 (0).
Both pilot lights are switched off.
"
Unplug the appliance from the socket.
"
Clean the appliance (see Cleaning).
7
Maintenance/Cleaning
"
Unplug the appliance before every maintenance or cleaning.
- or -
"
Disconnect the appliance from the mains before every maintenance or cleaning.
7.1 Maintenance
Ask exclusively qualified personnel to do the maintenance of the appliance.
Fault
Repair
The appliance is not working.
Check the power supply.
Make sure that contact pin on housing is correctly
pligged into control box.
Make sure that red pin of safety thermostat of control
box is in normal position.
The safety thermostat was activated
more than once.
Call qualified personnel and inform them about the
fault.