Vega NB-15 / User Manual
17
Revision 01 – 22 January 2020
Transmission period can be equal to 5, 15, 30 minutes, 1, 6, 12 and 24 hours. When
beginning of communication session, the device starts sending packets with readings from the
earliest packet. The time of data transmitting cannot be specified, it’s defined in random way
for every device in chosen period of transmission from the moment of connection to the
network. For example, transmission period is 30 minutes, and device was started at 16:40 by
the internal device clock. In random way the device calculate data transmitting time and set it
at 16:41 in the half-hour period from 16:40 to 17:10. Thus, packets from this device will transmit
at 16:41, at 17:11, at 17:41, at 18:11 and so on every 30 minutes by the internal device clock.
Guard settings
– allows to set up mode of security inputs triggering – when security
circuit is short, open or in a both cases.
Server settings
– settings of connection with MQTT broker.
Interface settings
– allows setting up the type of every input – it may be pulse or security
mode and choose the input mode 1-Wire/ModBus. If you choose the 1-Wire then ModBus
settings does not available, if you choose the ModBus then 1-Wire and temperature sensors
settings does not available.