Vega NB-14 / User Manual
16
Revision 04 of 24 January 2022
6.
Connecting the battery at the connector. After the battery connection the device
loads and comes to sleep until the next communication session.
7.
If you need to test the data transmitting, then press and hold the INIT button for the
2 seconds.
8.
Before assembling the device, you can reset the pulses accumulated during testing
and connection through the “Vega NB-IoT Configurator” if it is necessary.
9.
Assembling the device.
Location of the SIM
slot on the board (if
there is)
Battery connector’s
location on the
board