USER’S MANUAL VEF TA-206
INTRODUCTION
This manual is made in order to familiarize you with your phone set. In order to get maximum benefits of this product, we suggest that you read
the User’s manual carefully before using your phone set.
FEATURES
FSK/DTMF dual system Auto switch, FSK message auto-adjusts the time of the unit.
LCD displays incoming number, date, time, and total incoming calls
Outgoing dialed number and conversation time review and redial back
Local area code setting
Fast checking the incoming call by calling number and calling date & time
On-hook pre-dial and edit dialing number
Calendar and real-time clock display
Hands-free dial and speak, conversation time display
Anti Steal-Dialing
INSTALLATION
This phone requires 2 AA-sized 1.5V batteries. Open the battery compartment cover and insert the batteries in the right polarity, then close the
cover. When you find that LCD display becomes very dark or incoming LCD not lighted, or some function is not correct, please change the
batteries.
Plug line cord into jack at the rear of the telephone base, the other end of the line cord should be connected to telephone line. Plug coiled cord
into
handset modular jack. Plug the other end into the jack at the left side of the telephone. Set ringer volume according to your personal
preference. Set the P/T switch as required by your telephone exchange.
Caller ID function is available only after you apply this service to the local telecom company.
SYSTEM SET UP
At on-hook state, press SET to enter the set at this time, LCD will display the item to set. You can press UP to select the different item you would
like to set up. When you choose one item, press SET again to go into the setting and use UP to change the different setting. When finished,
press SET to go into the next item setting. You can leave the set up mode at any time with DEL key.
The detailed setting steps are the following:
SETTING THE DATE
SET YEAR
Press the SET, LCD will display SET 1 DATE, press SET again to enter the setting date mode. The digit for year 2002 (represents the YEAR) will
illuminate on the LCD and 01 will flash, press UP or to edit the YEAR, then press SET to confirm and carry on the next step-set the MONTH.
SET MONTH
The digit 1 M 1 D 00:00 (represents the MONTH, DATE, HOUR: MINUTE will illuminate on the LCD and 1 will flash, press UP to
edit the
MONTH, then press SET to confirm and carry on the next step-set the DATE.
SET DATE
The digit for 1 M 1 D 00:00 (represents the MONTH,
DATE, HOUR: MINUTE) will illuminate on the LCD and 1 will flash, press UP or DOWN to
edit the DATE, then press SET to confirm and carry on the next step-set the HOUR: MINUTE. Then the LCD automatically changes the Week of
that day.
SET TIME
The digit for 1 M 1 D 00:00 (represents the MONTH, DATE, HOUR: MINUTE) will illuminate on the LCD and 0 will flash, press UP to edit the first
digits of HOUR, then press SET to confirm and carry on the next step-set the second digits of HOUR. 0 will flash, press UP or DOWN to edit the
second digits of HOUR, then press SET to confirm and carry on the next step-set the first digits of TIME: MINUTE. 0 will flash, press UP to edit
the first digits of TIME: MINUTE, then press SET to confirm and carry on the next step-set the second digits of TIME: MINUTE. 0 will flash, press
UP to edit the second digits of TIME: MINUTE, then press SET to confirm and carry on the next step CODE
SETTING THE AREA CODE
LCD will display SET 2 CODE; press SET to enter the set mode. LCD will display CODE - - - - - and - will flash to indicate to set AREA CODE.
Press UP to adjust the AREA CODE number and press SET to confirm. Repeat this operation to the last digit. You only need to set 5 digits, if it is
4-digit, you need to press SET twice to exit.
SETTING LONG DISTANCE CODE
LCD will display SET 3 LCODE; press SET to enter the set mode. LCD will display LCODE - - - - - and - will flash to indicate to set LONG
DISTANCE CODE. Press UP to adjust the LONG DISTANCE CODE number and press SET to confirm. Repeat this operation to the last digit.
You only need to set 5 digits,
if it is 4-digit, you need to press SET twice to exit.
SETTING THE FLASH TIME
LCD will display SET 4 FLASH
，
press SET to enter, and then LCD will display FLASH 1 600 to indicate the default flash time is 600 mini-
second. Press UP to select the right flash time and to press SET to confirm. There are six kind of choices: 90ms, 120ms
，
180ms
，
300ms, 600ms
and 1000ms.
SET ANTI STEAL-DIALING FUNCTION
LCD will display SET 7 ALAR
，
press SET to enter, and then LCD will display ALAR OFF ,press UP or DOWN key to adjust from ALAR OFF to
ALAR ON according to your requirement. Press SET to confirm.
