VeEX VePAL TX320s User Manual Download Page 74

Page: 74 / 123

7.5 Advanced Tools

Advanced Tools

Go back to TOC

7.5.1 Fiber Tools

Fiber Tools Home Menu (FX150 reference)

Available Tool applications depend on the product model.

7.5.1.1 Fiber Scope

The VeEX digital inspection fiberscopes are fundamental tools for evaluating fiber optic connectors for dirt and end face quality. The handheld

probe design enables easy inspection of patch cords and difficult to reach bulkhead or patch panel connectors. Clear images are displayed on

the test sets for immediate analysis and can be saved for record keeping.

The Fiberscope test application can be used in conjunction with VeEX DI-1000, DI-1000MPO, and DI-3000 Fiber Scopes.

TX300s_Platform_Manual_RevB01

Page 74 of 123

Summary of Contents for VePAL TX320s




























































































































Search results

Summary of Contents for VePAL TX320s

Reviews:

Related manuals for VePAL TX320s

Brands by name

Popular brands

VeEX VePAL TX320s, User Manual

Search results

Summary of Contents for VePAL TX320s

Reviews:

Related manuals for VePAL TX320s

Brands by name

Popular brands