VePAL V300
Quick Reference Guide
V-SAM
Configuration
(cont’d)
14. Bandwidth Profile Parameters
−
Enter CIR (Committed Information Rate) value in IR
or ULR units. This is the guaranteed maximum rate at
which the customer can send frames that are assured
to be forwarded through the network without being
dropped.
−
Optional Enter EIR (Excess Information Rate) value in
IR or ULR units. Maximum rate above the CIR at which
the customer can send frames that will be forwarded on
a best effort basis, but may be dropped in the event of
congestion within the network.
−
Enable/Disable Traffic Policing Test (this test ensures that
traffic in excess of CIR+EIR is not allowed in the network)
−
If Traffic Policing Test is enabled, enter the traffic rate in
excess of CIR+EIR to be transmitted
−
Optional Enter CBS (Committed Burst Size) and EBS
(Excess Burst Size) in kB
13. From the Service Attributes tab, configure the Bandwidth
Profile and Service Acceptance Parameters.
−
Use to copy the Service Attributes settings
from one specific Service number to one or more other
Service numbers.
