VeEX RXT3900, User Manual

Page: 156 / 383

PRBS Pattern:
Use the pattern drop-down box to select the test pattern which will be inserted into the transmitted signal.
Pseudo Random Bit Sequences (PRBS) defined by ITU-T 0.150 and 0.151 standards, fixed words and 24-bit or 32 bit
user defined patterns are available.
Note: If the 32 bit user pattern entered is incorrect, the default pattern will be
0xFFFFFFFF.
Invert:
Inversion of PRBS polarity is also available. Inversion of fixed words is not permitted.
Go back to top Go back to TOC
12.5.5 Measurements
Measurements tab
Manual mode is chosen as the default configuration for starting/stopping the test.
Interval Save/Results Auto Save and Auto Server Upload is available in all modes. Depending on the V300 unit and test module
installed, Interval Save will appear as Results Auto Save.
Interval Save or Results Auto Save:
Test results automatically save at a specified interval. To enable interval save,
select
ON
and enter the
Save Interval
(in minutes.
Auto Server Upload
: Automatically uploads results to the server. The unit needs to be connected and registered to an R-
Server or FTP-Server to use this function. Selecting a server type will display a message prompt with the option to
connect and register to the server.
Go back to top Go back to TOC
12.5.6 General
General tab
RXT-3900 e-Manual D07-00-111P Rev A00