VeEX RXT-6000e, User Manual

Page: 237 / 387

MPLS Tab: MPLS label, CoS priority settings, TTL, and S-bit fields are configured for available MPLS tags.
Please refer to the BERT application for more details.
IP Tab: User configures the source and destination IP addresses.
The user can also configure the following IP header fields; IP TOS (for quality of service testing), TTL,
fragment offset byte, and the protocol field. Please refer to the BERT application for more details.
Go back to top Go back to TOC
13.3.1.2 Frames Settings
Frames tab:
User configures the following:
Preset Frames: User selects from a list of recommended test frame sizes defined in RFC 2544:
Test frames are 64, 128, 256, 512, 1024, 1280, and 1518 bytes.
The default selected frames are 64 and 1518 bytes.
To select/deselect any of the recommended test frames, check the box to the right of the desired frame.
When VLAN tagging or MPLS tagging is enabled, the value in parentheses reflects the actual frame
size transmitted. For example one VLAN tag adds 4 bytes to the frame size, therefore a 64B frame
becomes a 68 byte frame.
Add frame: The user can add two additional user configurable test frames of any size ranging from 64 bytes to
10000 bytes.
To add additional test frames, tap the
Add Frame
button.
Enter the frame size using the numeric keypad and click apply.
Press the back button to return to the frames screen.
The new custom frame size is displayed (it can be enabled or disabled as needed).
RFC 2544 Setup - Frame Settings
Go back to top Go back to TOC
13.3.1.3 Threshold Settings
Threshold tab:
RXT-6200_RXT6000e_Module_Manual Page 237 of 387