VeEX RXT-6000e User Manual Download Page 190

Page: 190 / 387

12.0 OTU-Xe

12.1 OTU-Xe Overview

Overclocked OTN Testing

An Overclocked option verifies extended bit rates to ITU-T series G supplement 43 standards. Overclocked OTN

compensates for the rate mismatch between 10 GbE LAN and OPU2 payload by raising the overall OTU2 data rate

from the standard 10.709 Gbps to fit the 10GbE LAN client signal.

OTU1e (11.0491Gbps) bit rate support (without fixed stuffing)

OTU2e (11.0957Gbps) bit rate support (with fixed stuffing)

Overclocked OTN supports the following two optical line rates for mapping 10GbE LAN signals.

Go back to top

Go back to TOC

RXT-6200_RXT6000e_Module_Manual

Page 190 of 387

Summary of Contents for RXT-6000e




































































































































































































































































































































































































Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands

VeEX RXT-6000e, User Manual

Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands