VeEX RXT-6000e User Manual Download Page 18

Page: 18 / 387

6.0 Setup: SDH/SONET/OTN

Accessing Setup:

Please see the

RXT-1200 Platform manual

Getting Started section to launch Test Applications.

SONET Home Menu

The Setup page has tabs for setting the OTN, and SDH/SONET.

Go back to top

Go back to TOC

6.1 Signal Overview

Tap on the

Signal

tab to set up the Transmitter and Receiver interfaces and associated test parameters prior to running

a test.

Signal tab

TX and RX Configurations

The Transmitter (TX) and Receiver (RX) configurations are grouped into a simple yet intuitive block diagram.

The TX and RX signal parameters can be modified by tapping the applicable block that brings up a new dialog

RXT-6200_RXT6000e_Module_Manual

Page 18 of 387

Summary of Contents for RXT-6000e




































































































































































































































































































































































































Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands

VeEX RXT-6000e, User Manual

Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands