VeEX RXT-6000e User Manual Download Page 104

Page: 104 / 387

8.0 SDH/PDH Alarms

Accessing Alarm Generation and Error Insertion

Tap on Home (main menu)

>Advanced Mode> Alarm/Error

The alarm and error functions are used in conjunction with the drop-down menu which has dedicated buttons for error

injection and alarm generation. Alarm and error selections will depend on PDH, SDH, or OTN signal types.

Alarm Setup

Go back to top

Go back to TOC

8.1 Alarm Generation

Generation range of different anomalies into the transmit signal. Alarm generation modes include:

Alarm Flow

Continuous:

Generates a continuous alarm when button is tapped

Count:

Specific count for 0.1s, 1s, 10s, 100s when button is tapped

Alarm/Error Generation

Go back to top

Go back to TOC

RXT-6200_RXT6000e_Module_Manual

Page 104 of 387

Summary of Contents for RXT-6000e




































































































































































































































































































































































































Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands

VeEX RXT-6000e, User Manual

Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands