VeEX MPA, User Manual

Page: 89 / 842

MPA Chassis
89
C14 connector on one end, and a wall-socket plug on the other end that is
certified for use in the country of installation.
3. Avoid Electric Overload : To avoid electric shock, fire hazard, or damage to the
instrument, do not apply a higher voltage.
a. The AC Power Supply is designed to be powered from 85-265VAC, 50
–60
Hz, 600 Watts.
b. A Power Load meter shows the current power load from 0% to 100%.
4. Ground the Instrument : For the AC power supply, the unit is grounded through
the grounding conductor of the power cord. To avoid electric shock, the
grounding conductor must be connected to earth ground. Before making
connections to the input or output terminals of the instrument, ensure that the
product is properly grounded.
For the -48v DC power chassis:
1. The 420W -48v DC power chassis supports dual power inputs for redundancy
and load sharing.
a. Refer to MPA Shutdown Procedure for the proper shutdown method before
connecting or disconnecting the DC power cord or swapping the DC power
supply.
2. Use proper Power Cord : To avoid fire hazard, only use the power cord provided
for this power supply.
a. The DC Power Supply supports dual 7W2 connectors, designed for -48V
input power supply.
MPA_e_manual_D07-00-129P_RevA00