FX30
Optical Light Source
VeEX Inc.
2827 Lakeview Court
Fremont, CA 94538 USA
Tel: +1.510.651.0500
Fax: +1.510.651.0505
www.veexinc.com
[email protected]
© 2014 VeEX Inc. All rights reserved.
VeEX is a registered trademark of VeEX Inc. The information con-
tained in this document is accurate. However, we reserve the right
to change any contents at any time without notice. We accept no
responsibility for any errors or omissions. In case of discrepancy,
the web version takes precedence over any printed literature.
D02-00-037P A00 2014/08
Functional descriptions
1. LCD
This displays the current information of the device on its screen panel. It
displays the wavelength and modulation of the light source.
2. ON/OFF
This is the power button that turns the device on and off. To power on the
meter, press and hold the power button until information appears on the
LCD. Press and hold the power button again to turn it off.
3. AUTO
OFF
While the device is on, press the AUTO OFF button to enable or disable
the AUTO OFF function. If AUTO OFF is enabled, a power icon will appear
in the top left corner of the LCD. When AUTO OFF is enabled, the device
will automatically turn off if there are no operations performed within 10
minutes.
4. WAVE
Press this button to select the output wavelength. The available
wavelength values are 1310 nm and 1550 nm (1490 nm is optional).
5. LIGHT
Press this button to turn on the backlight for the LCD. While the LCD back-
light is on, press the button again to turn it off.
6. MODE
Press this button to switch the modulation frequency of light source
between CW, 270 Hz, 1000 Hz, and 2000 Hz.
