The following measurements will be performed for each digital channel:
QAM Power Level in dBmV
The following measurements will be calculated based on the results of all channels and displayed under the summary tab:
Tilt in dB
Peak-to-Valley in dB
Min Power Level in dBmV
Max Power Level in dBmV
Min Delta V/A1 in dB (applies to analog channels only)
Max Delta V/A1 in dB (applies to analog channels only)
Once the test is completed or stop by the user, a marker is available and can be placed on any of the measured channel. The
measurements of the selected channel are then displayed.
10.0 Forward & Reverse Path Ingress
CX100/110/120/150/180 series e-Manual D07-00-002 Rev B01
Page 19 of 39
