Once the Web page is displayed, simply edit the switch configuration for port A and port B. See section 5 for
configuration settings.
Additionally the Ethernet IP setup may be modified directly on the Webpage. Select DHCP or STATIC mode.
If STATIC is selected, enter the desired IP address, Subnet Mask and Gateway and then click on UPDATE IP
CONFIG.
Note: If the IP address is changed, you will need to re-connect your browser to the new IP
address.
When a Firmware Upgrade is required, it may be installed via the webpage interface. Click on the BROWSE
button under Upgrade Firmware and navigate to the new firmware file. When it is displayed in the window, click
on the UPGRADE FIRMWARE button. Be sure not to power off the AT1700 during this process. When upgrade
is complete, a popup message will appear indicating the upgrade was successful.
Page 12 of 22
AT1700 series Manual D07-00-066P Rev. A00
