7
•
Analogue Settings.
•
Fuel Management.
•
Diagnostics.
•
Restore defaults.
2.2 En
g
ine ID
The engine ID can be changed to either port/single engine, starboard engine
or a centre engine, select the option that correctly describes the engine that
the display is connected to.
2.3
Data Sources
The ‘Data Source’ menu allows you to change where the display receives its
data from. You are able to change these data types; engine, battery, fuel
level, speed and rudder angle to read information from; NMEA 2000 (0183
for Speed), J1939 or analogue senders and also an option for a demo mode
on each data group. (Not all options are available for each setting)
To configure the display you will need to select the correct data source for
each sub heading by scrolling through the options with key 4. For example, if
you have an analogue engine but speed is transmitted over NMEA 0183, you
