23
3)
Headlight mode
If your bike is installed with a headlight, press and hold “
” button for 1 second to switch on or switch off
the headlight.
4)
Information menu
After switching on the E-bike system, the display shows
current Speed and ODO by default.
Press remote “i” button to switch between indication
functions below:
Trip Distance (Km)
→
ODO (Km)
→
Trip Time (Min.)
→
Power (Watts). Ultimately, it cycles back trip
distance again. Display indication cycle interface
5)
Switching Push-assist Mode On/Off
To activate the push-assistance function, press and hold the “-” button.
After 2 seconds, E-bike is activated to go at a uniform speed of 6 Km/h
while the screen displays. The push-assistance function is switched off
as soon as you release the “-” button. The E-bike system stops the power
output immediately. Push-assistance mode
Push-assistance function
may only be used when pushing the E-bike. Be aware of danger of injury
when bike wheels do not have ground contact while using push-assistance function.
6)
Exit the settings
In settings interface, Press i button (less than 2 s) is to confirm the input and save current settings.
Hold the i button (more than 2s) is to store the settings and exit the current setting.
Hold the - button (more than 2s) is to cancel the operations but not to store settings data and exit
Summary of Contents for Horser S1
Page 1: ......
