System Setup Screens
[270, 273-276] Auto-Dial Setup - Email
37
[270, 273-276] Auto-Dial Setup - Email
Legend for numbered boxes
6
7
8
9
6
7
6
1
2
3
4
5
6
[270]
[273]
[274]
[275]
[276]
[270]
[273]
[274]
[275]
[276]
Only for 15 minutes after powerup, or after the GET button
(item 6) is touched, will the TLS2P display the actual EMAIL
parameters (273 - 276) saved in the Lantronix server (see left
two screens - page 1 upper/page 2 lower). Thereafter, the
TLS2P substitutes xxx in place of the actual 274 and blanks
out other parameter data, indicating the screen’s data is no
longer valid (see right two screens in dotted box - page 1
upper/page 2 lower). This substitution frees the TLS2P from
having to be in continual commuication with the Lantronix
server.
1
Dial Type [270] EMAIL
2
Recipient 1 Email Address [273] in Lantronix server, 41
characters max. Touch alfpha key button to enter/edit
email address.
3
Recipient 2 Email Address [274] in Lantronix server, 41
characters max. Touch alfpha key button to enter/edit
email address.
4
From [275] - Name (label) for the TLS2P. touch the alfpha
key button to enter label (23 characters max.)
5
Mail Server IP address [276] in Lantronix server - touch IP
ADDR key to enter TLS2P Mail Server IP Address.
6
Get button - touch this button to have the TLS2P update
the display with the actual TCPIP parameters saved in the
Lantronix server. Explanation of the Get confirmation
dialog is shown on page 30.
7
Set button - Touch to save entered TCPIP parameters in
the Lantronix server. Explanation of the Set confirmation
dialog is shown on page 31.
NOTE: If any parameters have been changed but the
SET button was not touched to save them, the TLS2P
will automatically save them after 5 minutes.
8
Page down button - touch to view page 2 of Email setup.
9
Page up button - touch to view page 1 of Email setup.