System Setup Screens
[270-272, 277-278] Auto-Dial Setup - TCPIP
36
[270-272, 277-278] Auto-Dial Setup - TCPIP
Legend for numbered boxes
6
7
6
1
2
3
4
5
[270]
[271]
[272]
[277]
[278]
[270]
[271]
[272]
Only for 15 minutes after powerup, or after the GET button
(item 4) is touched, will the TLS2P display the actual TCPIP
parameters (271 and 272) saved in the Lantronix server (see
upper screen). Thereafter, the TLS2P substitutes xxx in place
of the actual 271/272 parameter data, indicating the screen’s
data is no longer valid (see screen in dotted box). This
substitution frees the TLS2P from having to be in continual
commuication with the Lantronix server.
1
Dial Type [270] TCPIP
2
Current Remote IP Address [271] in Lantronix server.
3
Current Remote port [272] in Lantronix server.
4
Push Site ID [277] - This feature will allow the TLS2P to
automatically establish a TCPIP connection to a Polling
Server. Select Enable or Disable. Default is Disable.
5
Site ID [278] - The Site ID is used to uniquely identify the
site for the Polling Server. Allowable selections: 1 to
999999. Default is 1.
6
Get button - touch this button to have the TLS2P update
the display with the actual TCPIP parameters saved in the
Lantronix server. Explanation of the Get confirmation
dialog is shown on page 30.
7
Set button - Touch to save entered TCPIP parameters in
the Lantronix server. Explanation of the Set confirmation
dialog is shown on page 31.
NOTE: If any parameters have been changed but the SET
button was not touched to save them, the TLS2P will
automatically save them after 5 minutes.