Veeder-Root TLS-450PLUS Install, Setup, & Operation Manual Download

Page: 69 / 98

Operations

Reports

Reports

There are two main reports (CP-201 required) that are stored by the ISD system: the Monthly Status Report

(CARB Monthly), stored for 12-months, and the Daily Status Report (CARB Daily), stored for 365 days. You can

access and view or print out ISD reports from the TLS console front panel by touching Menu>Reports>ISD (see

Figure 85).

Figure 85. Accessing ISD Reports

• The Daily Status Report (CARB Daily) includes:

- Maximum and minimum ullage pressures
- Results of the Vapor Containment Monitoring Gross (75th percentile), Degradation (95th percentile) ullage

pressure test and Vapor Leakage Detection (CVLD) tests

- Vapor Collection monitoring test results for each fueling position
- Vapor Processor monitoring test results

•

The Monthly Status Report (CARB Monthly) includes:
- ISD operational up-time (as a percentage)
- EVR/ISD system pass time (as a percentage)
- Last 10 Warnings log
- Last 10 Failures log
- Last 10 Misc. Events log

• Daily Collection Report includes daily results of:

- ISD EVR Status

- % Up Time

- Vapor Collection Monitoring test results for each gasoline fueling position.

- The printout will also include the ISD Status Report.

Summary of Contents for TLS-450PLUS



































































































Search results

Summary of Contents for TLS-450PLUS

Reviews:

Related manuals for TLS-450PLUS

Brands by name

Popular brands

Veeder-Root TLS-450PLUS, Install, Setup, & Operation Manual

Search results

Summary of Contents for TLS-450PLUS

Reviews:

Related manuals for TLS-450PLUS

Brands by name

Popular brands