2
Introduction
Supported Vapor Recovery Systems
Supported Vapor Recovery Systems
Table 1 lists V-R supported vapor recovery systems.
Contractor Certification Requirements
Veeder-Root requires the following minimum training certifications for contractors who will install and set up the
equipment discussed in this manual:
All service personnel on site must comply with all recommended safety practices identified by OSHA and your employer.
Review and comply with all the safety warnings in this an any related documents, and any other Federal, State, or Local
requirements
Warranty Registrations
may only be submitted by selected Distributors.
Table 1: Vapor Recovery System
Name
CARB Executive Order
V-R Vapor Polisher
VR-204
Franklin Clean Air Separator (CAS)
Veeder-Root Contractor
Certification Requirements
Installer
Certification
6
ATG Technician
Certification
7
VR Vapor Products
Certification
8
TLS-450PLUS
EVR for CA
Certification
Install
1
ISD
X
X
X
X
Install PMC
X
X
X
X
Install CCVP
X
X
X
X
Install Wireless ISD/PMC
X
X
X
X
Installation Checkout
2
X
X
X
ATG Startup
3
/ Training
4
/ Service
5
X
X
X
ISD Startup / Training / Service
X
X
PMC Startup / Training / Service
X
X
CCVP Startup / Training / Service
X
X
Wireless ISD/PMC Startup / Training / Service
X
X
Install Pressure Sensor (ATG)
X
X
X
X
Maintain Pressure Sensor (ATG)
X
X
X
Calibrate Pressure Sensor (ATG)
X
X
X
Clear ATG Pressure Sensor Alarm (ATG)
X
X
X
Clear ISD/PMC Alarms (ISD/PMC)
X
X
1
Perform wiring and conduit touting; equipment mounting
2
Inspect wiring and conduit routing; equipment mounting
3
Turn power on, program and test the systems
4
Provide supervised field experience in service techniques and operations
5
Troubleshoot and provide routing maintenance
6
UST Monitoring Systems – Installer (Level 1)
7
Certified UST Monitoring Technician
8
VR Vapor Products
