background image

Introduction

Before You Begin

2

Before You Begin

Table 1 lists the replacement parts needed for the display replacement instructions described in this manual.

WARNING

Heed the adjacent instructions to avoid 
damage to equipment, property, environ-
ment or personal injury.

READ ALL RELATED MANUALS
Knowledge of all related procedures before you 
begin work is important. Read and understand all 
manuals thoroughly. If you do not understand a pro-
cedure, ask someone who does

WARNING

This system operates on 115 or 230 Vac power. Serious injury or death from 
electrical shock could occur if the power ON/OFF warnings in this manual are not 
heeded. 

FAILURE TO COMPLY WITH THE FOLLOWING WARNINGS AND SAFETY 
PRECAUTIONS COULD CAUSE DAMAGE TO PROPERTY, ENVIRONMENT, 
RESULTING IN SERIOUS INJURY OR DEATH.

1. Read and follow all instructions in this manual, including all safety warnings.

2. Remove rings from hands, metal watch bands and bracelets, and loose 

hanging neck jewelry before performing these procedures. 

3. Do not modify or use service parts other than those provided by Veeder-Root. 

Table 1. Display Replacement Kit P/N 330020-816

Item

P/N

Description (Illustrations Below)

Qty.

1

329326-001

LCD Display

1

2

329371-002

Plastic Cover

1

3

330617-000

TLS-350 Series, EMC, ProMax And Proplus Consoles - Wiring Input Labels

1 set

4

330636-000

TLS-300 Series And EMC Basic Consoles - Wiring Input Labels

1 set

5

577014-101

Manual

1

GROUND

AC POWER

L

1

G

N

Connected to:

RELAY 2

Connected to:

RELAY 1

GROUND

POWER AREA

Connected to:

INPUT 2

Connected to:

INPUT 1

6.
7.
8.

3.
4.
5.

8.

PROBE LOCATIONS

15.

1.
2.

18.

17.

16.

12.
13.
14.

9.
10.
11.

SENSOR LOCATIONS

INTRINSICALLY SAFE AREA

7.

6.

5.

4.

3.

2.

1.

GROUND

-001

-002

POSITION RECORD

GROUND

9

3
4

MODULE TYPE;

1
2

4

7
8

5
6

8

POSITION RECORD

POSITION RECORD

POSITION RECORD

POSITION RECORD

4

10

11

4
MODULE TYPE;

1
2
3

MODULE TYPE;

1
2
3

13

12

4
MODULE TYPE;

1
2
3

MODULE TYPE;

2
3

1

8

5
6
7

8

5
6
7

8

5
6
7

6
7

5

POSITION RECORD

POSITION RECORD

POSITION RECORD

MODULE TYPE;

14

15

MODULE TYPE;

2
3
4

1

2
3
4

1

GROUND

POWER AREA

16

MODULE TYPE:

2

4

3

1

6
7
8

5

6
7
8

5

6

8

7

5

MODULE TYPE;
POSITION RECORD

3

GROUND

4

1

1
2

4

7
8

5
6

8

4

8

MODULE TYPE;
POSITION RECORD

MODULE TYPE;
POSITION RECORD

4

2

1
2
3

3

1
2
3

5
6
7

8

5
6
7

MODULE TYPE;

POSITION RECORD

MODULE TYPE;
POSITION RECORD

4

4

1
2
3

5

2
3

1

8

5
6
7

6
7

5

INTRINSICALLY-SAFE AREA

MODULE TYPE;

MODULE TYPE;
POSITION RECORD

POSITION RECORD

6

2
3
4

1

7

2
3
4

1

6
7
8

5

6
7
8

5

POSITION RECORD

MODULE TYPE;

8

2

4

3

1

GROUND

6

8

7

5

N     L1

-001

-002

329326-001 LCD Display
329371-002 Plastic Cover

330617-000 Label Set

330636-000 Label Set

577014-101 Manual

TLS-3XX Series Consoles

Manual No:

 

577014-101

   

Revision:

 

A

Displ

a

y Repl

a

cement Guide

Summary of Contents for TLS-3 Series










Reviews: