4
Assembling Probe Components
Attaching Probe Canister Insulator Sleeves (2-Inch Risers)
1.
Open the Probe shipping carton so that you have access to the probe. Also open the installation kit.
2.
Install the two canister sleeves onto the probe canister as shown in Figure 2.
Figure 2. Installing Probe Canister Insulator Sleeves
Attaching Probe Canister Stabilizer Rings (3- & 4-Inch Risers)
1.
Open the Probe shipping carton so that you have access to the probe. Open the installation kit.
2.
Set the ad
j
ustable arms of the rings for a 3- or 4-inch riser (see Figure 3) as required. Install the two stabilizer
rings onto the probe canister as shown in the figure. Note: you must slide the bottom ring up over the probe
shaft and onto the lower end of the canister.
1
2
3
4
987-3.eps
