Mag-FLEX Probe Overview
Fafnir BA-350 Protection Device (Surge Protector)
11
Figure 1. View Into Open Enclosure Of A BA-350-2
INFORMATION ON SAFE ADJUSTMENT
There are no required safety adjustments.
INFORMATION ON SAFE PUTTING INTO SERVICE
Before putting the Mag-FLEX probe into service, double check connections and mounting.
INFORMATION ON SAFE MAINTENANCE AND REPAIRING
In general, the equipment is maintenance free. Defective equipment must be returned to the manufacturer or one
it’s representatives. If a test is required, it must be conducted under well-controlled conditions (an explosive
atmosphere shall not be present). It is also necessary to disconnect the overvoltage discharge device, according
to EN/IEC 60079-25, clause 12, because of a non-conformance with EN/IEC 60079-11, clause 6.3.13.
Surge Arrestors
Outside Terminal
Terminal Blocks
