C&C Mode
C&C Mode Setup Categories
52
RESTART
Figure 50 illustrates the Restart procedure in C&C Mode.
CAUTION: DO NOT USE UNDER NORMAL
CONDITIONS!
Figure 50. Restart Options
SECURITY CODE
LANGUAGE
DISPLAY SYNTAX
TEMPERATURE
FUEL SOURCE
METER CALIBRTN
CONFIGURE I/O
OEM MESSAGE
DELIVERY OPTIONS
REPORT FORMATS
PRESERVE NVRAM
INIT NVRAM
SOFTWARE UPGRADE
+
-
+
-
+
DH NVRAM
DH AND IB NVRAM
+
-
+
Press the up/down
buttons to cycle
through remaining
C/C Mode categories
RESTART
Selecting YES, then ENTER reboots and
performs a self-test of the Display Head,
without changing any setup parameters
or resetting the Grand Totalizer to 0.
CAUTION!
Selecting YES, then ENTER you:
• Reboot and perform a self-test of the Display Head
• Restore all setup parameters to the factory default settings
• Reset the Grand Totalizer count to 0
• Clear all stored transaction records
IMPORTANT! Prior to initializing NVRAM:
• Print a ticket,
• Record the totalizer value, and
• Record the calibration values.
CAUTION!
Selecting YES, then ENTER you:
• Reboot and perform a self-test of the Display Head
• Restore all setup parameters to the factory default settings
• Reset the Grand Totalizer count to 0
• Clear all stored transaction records
IMPORTANT! Prior to performing a
software upgrade:
• Print a ticket,
• Record the totalizer value, and
• Record the calibration values.
YES
NO
+
-
+
YES
NO
+
-
+
YES
NO
+
-
+
Notice - The Display Heads will automatically enter and remain in the
Download Manager Mode during the software upgrade process which can
take several minutes to complete.
