Setup Mode
Setup Mode Categories
29
Printer Address
Figure 28 illustrates Printer Address setup choices.
Figure 28. Printer Address Setup
TIME DELAYS
Figure 29 illustrates Time Delay setup in Setup Mode.
Figure 29. Time Delay Setup
Press ENTER to return
to SYSTEM ADDRESS
PRINTER ADDRESS
LOCAL PRINTER
SET PRINTER 1
SET PRINTER 16
-
+
This menu selects the printer for this Display Head. Select a printer on Host IB (the IB to which this Display Head
is wired), use Local Printer. Select a printer connected to an IB other than the one to which this
Display Head is wired, select that IB’s adddress. By default, the printer address is set to the host IB (the IB to which
the Display Head is wired), and will be displayed as "LOCAL PRINTER". Printers on other IBs will display as
"SET PRINTER nn", where nn is the IB address.
BACKLIGHT XX
BLANK SCREEN XX
VOLUME MODE XX
+
-
+
-
+
SET SECONDS
Press the up/down arrows
to scroll through the
numbers, and NEXT
to move from one
number to the next.
SET SECONDS
Press the up/down arrows
to scroll through the
numbers, and NEXT
to move from one
number to the next.
SET SECONDS
Press the up/down arrows
to scroll through the
numbers, and NEXT
to move from one
number to the next.
Press the up/down
buttons to cycle
through remaining
Setup Mode categories
Note: Default is 30 seconds. You
can enter any delay from 10 to
999,999 seconds after which the
display backlight will go off if no
buttons are pressed.
Note: Default is 30 seconds. You
can enter any delay from 10 to
999,999 seconds after which the
display will go blank if no buttons
are pressed.
Note: Default is 30 seconds. You
can enter any delay from 10 to
999,999 seconds after which the
display will return to the Volume
Mode if no buttons are pressed.
VERSION NUMBER
C AND C
ENTER SECURITY CODE
PRICING
TAX/DISCOUNT
DEFAULTS
RELAY CONTROL
SECURITY
PRINTER OPTION
VIEW RECORDS
RESTORE RECORD
SHIFT
DATE FORMAT
TIME/DATE
SYSTEM ADDRESS
TIME DELAYS