8
Data Entry
Navigation Buttons
The navigation buttons consist of the MODE, NEXT, ENTER, PRESET, and +/- buttons. They can be used to
either select and set parameters, or select and set alpha and numeric values.
•
MODE
- Press to navigate through the Modes; Setup, Volume, Currency, and Rate.
•
NEXT
- Press to move to the next submenu for a selection of a parameter or an alpha (Descriptor Field) or
(Preset Field) numeric selection.
•
Press to scroll upward through the menu selections, to cycle through numeric characters 0 to 9, alpha
characters Z to A, and special characters for each position in a selected display.
•
Press to scroll downward through the menu selections, to cycle through alpha characters A to Z, numeric
characters 9 to 0, and special characters for each position in a selected display.
•
ENTER
- Press to accept selection of parameter or alphanumeric values, or to return to prior menu selection.
•
PRESET
- Press to move to the preset countdown or preset entry.
Figure 5 illustrates the use of front panel buttons to make selections and navigate in Setup Mode.
Figure 5. Using Front Panel Buttons to Navigate in Setup
Data Entry with Standard Keypad
Upon entering the Descriptor or Preset Field with the use of the navigation buttons, a blinking cursor appears in
the far left of the field if, the field is empty or has a zero value. If the field contains data, a blinking cursor appears
one position to the left of the first non-blank field.
Pressing the +/ - buttons will scroll through alpha or numeric options for entry in the position. Holding down the +/
- buttons will scroll automatically without having to depress the button for each value. Pressing the NEXT button
will move the curser to the right for the next position. During alpha entries numeric, special characters, and blanks
are available. Pressing the NEXT button without scrolling to another selection will leave the current value and move
to the next location.
Subsequent presses of the NEXT button will shift the selected entry point to the right so the next digit/alpha/
space can be selected. When the last or least significant position is reached the subsequent press of the NEXT
button will wrap around to the most significant position. When changes are complete, press ENTER to accept
values.
PRICE DOLLARS
DOLLAR PRICE
PRESET DOLLARS
DOLLAR REMAIN
DOLLAR PRESET
-
+
Press ENTER to accept
changes and select
another label. Repeat
until you enter all
label changes.
Press ENTER to return
to LABEL CHANGES
Make your changes
to a label, pressing
up/down arrows to
scroll through the
alphabet, and NEXT
to move from one
character of the label
to the next.
ENTER
ENTER
CURRENCY LABELS
NEXT
NEXT
Note: 24 characters maximum.
