XSTREAM 2.4 GHZ WIRELESS MODEM
For use with VEEDER-ROOT EMR³ DATALINK
INSTALLATION INSTRUCTIONS
Manual 577013-894, Rev. B
Page 5 of 14
Upon completion of the wiring and power to the IB is turned on, Turn on the Switch of the
XStream modem and the red light on the modem next to the RS-232 connector will be on.
Before leaving the vehicle, go to the display, and make sure the PORT 2 ASSIGN under
SETUP, SYSTEM ADDRESS is set to OBC.
•
Push the MODE button to get to SETUP, Arrow Up to SYSTEM ADDRESS, NEXT to
IB ADDRESS, Arrow up to PORT 2 ASSIGN, NEXT, if not OBC the Arrow to OBC
and ENTER, ENTER, and ENTER. You can then push the MODE button to get back
to Volume Mode.
Red Power
Power
switch Up -
On
