1
Introduction
RED JACKET’S IQ™ Control Box raises the standard for typical relay control boxes. Incorporating a
microprocessor on board that continuously monitors the submersible pump provides insurance against conditions
that can permanently damage the pump. In addition, the increasing number of dispensers at a station has
demanded more than one pump per tank. Red Jacket’s IQ Control Box can be connected to additional control
boxes to allow up to four pumps per tank with demand driven sequencing. This function can be set to alternate
between pumps that initiate next dispensing events to average the wear on all of the pumps in the system. The
pump control circuit features non-volatile memory retention eliminating the need to recalibrate if power is lost.
IQ Control Box version 3 software adds support for Faradyne motors. The software will also support Franklin
motors. Software version 3 requires the motor type to be programmed into the unit. The five-position unit
configuration switches, reset/calibration button, and bypass/normal jumper are used to program the Motor Type.
The microprocessor chip containing software version 3 is marked 805-001C or higher.
Appendix A provides application, technical and installation guidelines for Veeder-Root certified technicians who
will be installing and setting up the Red Jacket IQ Control Standard Diagnostic Feature with a TLS-450PLUS
system.
Retain this instruction manual with the equipment after installation for future use.
Safety Precautions
The following safety symbols are used throughout this manual to alert you to important safety hazards and
precautions.
TURN POWER OFF
Live power to a device creates a potential shock hazard.
Turn Off power to the device and associated accesso
-
ries when servicing the unit.
ELECTRICITY
High voltage exists in, and is supplied to, the
device. A potential shock hazard exists.
NOTICE
Is used to address practices not related to physical
injury.
DANGER
Indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury or property dam
-
age.
WARNING
Indicates a hazardous situation which, if not
avoided, could result in death or serious injury or
substantial property damage.
READ ALL RELATED MANUALS
Knowledge of all related procedures before you begin
work is important. Read and understand all manuals
thoroughly. If you do not understand a procedure, ask
someone who does.
STATIC SENSITIVE COMPONENTS
Wear grounded anti-static wrist strap before han
-
dling the printed circuit boards and mounted
components.
