Veeco Dimension 3100, Manual, Page: 84 / 376

Installation
Connecting the Dimension 3100 System
64 Dimension 3100 Manual Rev. D
Connect the Dimension 3100 Controller
1. Connect extensions to the Dimension 3100 Controller . See Table 4.4c and Figure 4.4d for
list of extensions, connection information and connection location.
Note: The Dimension 3100 cables are bundled through the cable clamp provided if
the system includes a vibration isolation table. (See section titled
Route the
VT103 Air Table Cabling at the end of the chapter).
Table 4.4c Dimension 3100 Controller Connections
Figure 4.4d Dimension 3100 Controller (rear view)
CAUTION: Do not remove or install the cable while the NanoScope IIIa
Controller is powered-up or in operation.
Fig
Ref
Cable
Part
Number
Box Function
1 AC Power 466-000-004 Power Strip Dimension 3100
controller Power
2 Vacuum Hose
Assembly
860-000-012 D3100
Back Panel
Vacuum and air supply
3 Serial Cable (6') 464-000-024 Computer Serial communication w/
computer
4 DC Power Cable 820-000-006 D3100
Back Panel
Motor power
5 Fiber Optic Cable 443-000-001 D3100 Micro-
scope Optics Optics illumination
I
O
4
1
5
2
3
3903
AC
POWER
ETL STICKER HERE
SERIAL NO. STICKER HERE
DC
POWER
SERIAL
PORT
Lightbulb is the only
user serviceable part
MICROSCOPE
AIR & VACUUM