VEC-1856 Instruction Manual
6 Meter Ground Plane Antenna
6
Figure 5
Antenna base with stainless steel plate assembly shown.
Step 6:
To install the antenna to your mast:
A. Remove the nuts, washers and saddle from the U bolt. See Figure 6.
Figure 6
U bolt assembly.
B. Place the U bolt around the mast (not included) and install the saddle on the U bolt.
Be sure the saddle is in the correct position to "bite" into the mast.
C. Slide one of the fiberglass plates on the U bolt until it is against the saddle. Insert the
U bolt through the plastic bushings on the back of the base. Be sure the plastic
bushings remain in place. See Figure 7.
