Vectronic Aerospace VERTEX Lite Collar, User Manual

Page: 28 / 87

Direct Collar Communication 28
© 2017 VECTRONIC Aerospace GmbH
The “Radio Monitor” feature is discussed in chapter The VERTEX Lite Collar as UHF ID
Tag.
In the node “Device Search” you can search for collars. Per default you search for any
devices in range (“Any Device”). You can also search for specific device types. To do
that, select a
Device Type . If you want to search for a specific collar ID, please enable
Specific Device ID
and select the ID of your collar. Click on , attach the
magnet to your device within the next 10 seconds and detach it after one second (As it
is described in
Collar Contact (general) ). A list of all devices found will appear.
Figure 18: USB Remote Stick Device Search frame
Once ensured that the devices work and can be contacted by the software, collar
communication and reconfiguration can be started.
5.2.1 Remote Stick Collar Contact
To configure the collar, make sure that the magnet is detached from the collar so that it
is able to receive configurations and send data. Whenever you click on a node in the
Devices tree (Information, Configuration, Schedules or Collected data), a notification
message will appear. In this message, you are requested to attach the magnet to the
collar and detach it after one second. You can abort the connecting process by clicking
the corresponding button or the ESC button on your keyboard.
Figure 19: Notification window which appears when you send out a command of any kind.