Vectron Vario II, User Manual

Page: 14 / 112

14
V ec t rOn POS Va rIO II
2. General not es on safe t y
This chapter informs you about general hazards that exist when
operating the Vario II.
Observe the following notes on safety by all means:
A
DANGER
• Use exclusively undamaged power cords, power supplies and
POS systems in their original state. You can suffer an electric
shock
, if for instance the components of the POS system are
not insulated properly. Please contact your Vectron dealer if
the components of the POS system are damaged.
• Never open the power supply and the POS system, e.g. in order
to repair the components of the POS system yourself. You can
suffer an electric shock
, since some components can have
residual current, which discharges when being touched. Please
contact your Vectron dealer if the components of the POS sys-
tem are damaged.
A
CAUTION
• Never put your fingers into the small gap between display
housing and hinge. You can crush your fingers , since the gap
becomes smaller when the display housing is moved. Before
adjusting the display please read chapter 6.3 “Adjusting the
display” on page 49.