8
SPECIFIC SAFETY INSTRUCTIONS FOR THE
12V DC OUTPUT
• Do not insert foreign objects into the 12VDC output port.
• Do not attach more than one personal electronic device to the 12VDC
output ports .
• Some household powered electronics will not operate with this unit.
12 VOLT DC PORTABLE POWER SUPPLY
WITH COMBINED 10A OUTPUT
DC 5.5 output port:
Insert the 12V DC plug into the DC output port of the machine, first make
sure that the main power is turned on, then press the DC button to turn
on 12V DC output. At the same time, the corresponding symbol is
displayed on the LCD screen.
12V DC accessory output port:
Insert the 12V DC accessory plug into the DC accessory socket of the
unit, first make sure that the main power is turned on, then press the DC
button to turn on 12V DC output. At the same time, the corresponding
symbol is displayed on the LCD screen.
After charging is completed, press the DC button again, turn off the 12V
DC output of the unit, and pull out the 12V DC accessory plug from the
12V DC accessory socket of the unit.
IMPORTANT:
always check correct polarity of the device prior to
accessing 12 volt dc outlet.
LED AREA LIGHT
The built-in high intensity area light is controlled by the area light power
button on the control panel (refer to the Features section to locate). Make
sure that the main power is on, then press the LED button to turn on the
lighting function and display the corresponding symbol on the LCD
screen.
1. Press the light button a second time to activate the light at 50% capacity.
2. Press the light button a third time to switch to SOS mode.
3. Press the light button a fourth time to switch the light off.
Make sure the area light and the unit are turned off when the unit is being
recharged or stored.
SAVE THESE
INSTRUCTIONS
OVERVIEW
LCD Warning Symbols
Flashing once per
second, unit will go
to sleep after 10
seconds.
Cause:
Charging fault (high & low temperature
protection).
Solution:
Unplug the charger, after the battery
temperature returns to normal, reconnect the
charger for charging the unit.
Flashing once per
second, unit will go
to sleep after 10
seconds.
Cause:
Discharge high temperature protection.
Solution:
After the battery temperature returns to normal
press the main power button to restore.
Flashing once per
second, unit will shut-
down after 10 seconds
Cause:
DC output fault (over-current or short circuit
protection).
Solution:
Press the DC button to restore after the load
is removed.
Flashing once per
second, unit will shut-
down after 10 seconds
Cause:
USB-A output fault (over-current or short circuit
protection).
Solution:
Press the USB-A button to restore after the
load is removed.
Flashing once per
second, unit will shut-
down after 10 seconds
Cause:
AC output fault (overload or short circuit
protection).
Solution:
Press the AC button to restore after the load
is removed.
Flashing once per
second, unit will shut-
down after 10 seconds
Cause:
USB-C output fault (over-current or short circuit
protection).
Solution:
After the fault is removed, re-plug and restore
the output.
Note:
The unit will automatically power off once ALL the functions are turned off
.
CARE AND MAINTENANCE
All batteries lose energy from self-discharge over time and more rapidly at
higher temperatures. When the unit is not in use, we recommend that the
battery is charged at least every 30 days.
Never submerge the unit in water. If the unit gets dirty, gently clean the
outer surfaces of the unit with a soft cloth.
There are no user-replaceable parts. Periodically inspect the condition
of adapters, connectors and wires. Contact manufacturer to replace any
components that have become worn or broken.
Battery
Please be advised that the battery is designed to last the service life of
the unit and is not replaceable, removable or serviceable.
Service life is
dependent on a number of factors including but not limited to the number
of recharge cycles, and proper care and maintenance of the battery by the
end user. Contact manufacturer for any information you may need.
SAFE BATTERY DISPOSAL
Contains a lithium battery, which must be disposed of properly.
Recycling is required. Failure to comply with local, state
and federal regulations can result in fines, or
imprisonment.
Please recycle.
WARNINGS:
• Do not dispose of the battery in fire as this may result in an explosion.
• Before disposing of the battery, protect exposed terminals
with heavy-duty electrical tape to prevent shorting (shorting can result in
injury or fire).
• Do not expose battery to fire or intense heat as it may explode.
ACCESSORY PLUGS NOT INCLUDED
12V/10A DC ACCESSORY PLUG
DC 5.5
