TRI2-FU
P
RODUCT
D
ATA
S
HEET
Doc: 70-00-0750C, 20230220
© Vector Controls GmbH, Switzerland
Page 6-10
Subjects to alteration
www.vectorcontrols.com
V
ECTOR
Operation and Configuration
Documentation
This controller uses the latest generation X2 operating system. Detailed operation instructions for all devices equipped
with this operating system can be found on our website.
Also available are programming instructions for technicians and an application database.
Configuration
The device can be fully configured and commissioned using the EasySet program or the built-in
operation terminal.
EasySet may be downloaded free of charge from our website
Configuring the TRI2 device
Configuring with EasySet
(free PC application)
Use the PC and the EasySet tool to easily configure the TRI2 to your needs. Connect the PC with the
EasySet tool ether with the AEC-USB converter and the AEC-TRI-2 configuration adapter to the TRI2 or
use the Wi-Fi communication of the PC to connect to the TRI2 (for TRI2-WIM /-WIB devices only). See
TRI2 installation sheet for connection details.
Configuring with Operation Terminal
You can use the built-
in operation terminal to configure the TRI2 to your needs. See “X2 Operations Manual touch display”
and “X2 Engineering Manual” for details.
Copy Configuration to other TRI2 devices
Complete parameter sets may be copied using the accessory AEC-PM2 or exchanged with a PC
using the EasySet tool and an RS485-USB converter or via Wi-Fi communication.
Copy configuration with the AEC-PM2
Use the configuration adaptor ACE-TRI-2 to load the configuration onto the AEC-PM2 plug-in
memory (see TRI2 installation sheet for connection details).
To copy the configuration to other TRI2 devices, connect the AEC-PM2 plug-in memory to the
TRI2 and simply press the copy button (see TRI2 installation sheet for connection details).
Copy configuration with EasySet
(free PC application)
To copy the configuration to other TRI2 devices, connect the PC with the EasySet tool ether with the AEC-USB converter
and the AEC-TRI-2 configuration adapter to the TRI2 or use the Wi-Fi communication of the PC to connect to the TRI2 (for
TRI2-WIM /-WIB devices only). See TRI2 installation sheet for connection details.
Documentation overview
Document Type
Document No.
Description
TRI2-FU Data Sheet
70-00-0750
Product data sheet (this document)
TRI2-FU Install Sheet
70-00-0743
Mounting and installation manual
X2 Operations Manual touch display
70-00-0951
Operations instructions of X2 system with touch display
X2 Web Interface operation manual
70-00-0952
Operations instructions of X2 Web interface
X2 Engineering Manual
70-00-0737
Guidelines for configuring the X2 system
X2 Modbus Communication Module
(-MOD type)
70-00-0290
Setup and configuration manual Modbus (no Modbus TCP)
X2 Modbus Communication Module
(-WEM type)
70-00-0925
Setup and configuration manual Modbus TCP
X2 BACnet Communication Module
(-BAC type)
70-00-0218
Setup and configuration manual BACnet (no BACnet/IP)
X2 BACnet/IP Communication Module
(-WEB type)
70-00-0899
Setup and configuration manual BACnet/IP
X2 Wi-Fi / Ethernet Communication
Manual
(-WEM, -WEB type)
70-00-0900
Setup and configuration manual TCP/IP
Note: The above list is not complete. The documents on the website are relevant.
AEC-PM2
AEC-TRI-2
AEC-USB
