PROFESSIONAL POWER AMPLIFIERS
1.
2.
3. 4. 5.
6. 7.
8.
9. 10.
11.
1.
Rack mount ears for 19” rack mounng
2. Channel
A
aenuator control allows the input to be amplified.
3. Bridge Mode
– this LED will illuminate if the amplifier is operated in Bridge Mode (using switch on the rear)
4. Ac/ve
– When the amplifier is switched on the LED’s will illuminate
5. Signal
– this LED will illuminate to show that a input signal is present.
6. Clip
– the LED will illuminate when Clip mode, you should reduce the input level to avoid damage.
7. Pro
—the LED will illuminate if the amplifier goes into protect mode (disconnecng the speaker outlet)
8.
Mains On/Off switch
9. Channel B
aenuator control allows the input to be amplified
10. Stereo Mode
– will illuminate when the amplifier is in stereo operaon.
11
. Fan outlet grill, air is taken in at the rear and expelled from the front grilles.
A.
B.
C.
D.
E.
F.
G. H.
I.
J. K.
A. Fan Inlet
—do not obstruct
B. Channel B Speaker Outlet
—Speakon connector
C. Channel B Input
– Mul Connector Jack plug 6.3mm or XLR 3 Pin Male
D. Channel B Speaker Outlet
—Binding Posts (Red +ve and Black –ve)
E. Stereo or Bridge Mode
switch (linked to LED indicator on Front Panel)
F. Tenarle/In Defeat Switch
– This is not used in this model amplifier.
G. Channel A Speaker Outlet
—Binding Posts (Red +ve and Black –ve)
H. Channel A Input
—Mul Connector Jack plug 6.3mm or XLR 3 Pin Male
I. Channel B Speaker Outlet
—Speakon connector
J. Fuse Holder
K. Mains Inlet
IECC Socket 240v
