COMMON FAILURES
AND TROUBLE SHOOTING
1. Failures >
Motor doesn’t work
The battery capacity is not enough, the battery is in automatic protection
mode when the power light become red.
CAUSE 01
Check if the battery is adequate and if the fogger is charged
SOLUTION
Overload operation.
CAUSE 02
Stop working and put the machine at a ventilated area for 30 minutes.
SOLUTION
2. Failures >
Machine runs but without spraying droplets
The solution is not enough or there is no solution in the tank.
CAUSE 01
Check and fill more solution into the tank.
SOLUTION
Solution tank cap is not well fastened.
CAUSE 02
Fasten the solution cap.
SOLUTION
Spray nozzle blockage.
CAUSE 03
Clean the nozzle.
SOLUTION
Notice: The charger indicator light will become red when it is charging and turn green
when it is full charged.
Charging method: When the battery is in the machine, the machine must be placed in
a safe, dry and in an appropriate conditioned environment when it is charging. Placing
the equipment gently, connect the charger plug and connector on the side of the
fogger, continuously charging until the light becomes green
1
2
BATTERY OPERATION AND
MAINTENANCE METHODS
For the convenience of our customers, you can choose to use spare batteries. The
battery can be charged in the machine or charged separately.
www.vectorfog.com
05