CDI4.MUen.00
Vecteur CDi4 Owner’s Manual
Page: 7/8
Track search
During playback or in stop mode, you can select a track by:
·
Pressing the
>>I
button
to move forward to the start of the next track.
If you are playing the last track of the disc, pressing this button will make the disc restart
from the 1st track.
·
Pressing the
I<<
button to move backwards to the start of the previous track.
If the track playing is the first one, pressing this button will make the disc start its last
track.
Note : in« pause » mode, track search is not possible
Using the track number on the remote control
o
Push the track number button on the remote control to have direct access to this track.
o
For the tracks beyond, push 1 then on the button corresponding to the second digit of the
track within the next 2 seconds.
Functions that can be reached with the remote control only
Scan
This function makes it possible to move forward or backwards during the playback of a track
·
Press the …for a fast forward playback
·
Press the … for a fast reverse playback
·
Release the pressure on the button and the disc is playing normally
·
Scan stops when you reach he end of the disc
·
In Repeat mode, when you reach the end of the disc, playback will restart normally at the
beginning of the disc.
Filter selection
This unit supports two kinds of audio formats.
The user can press the button on the front panel in order to have either
1.
« Sharp » mode
2.
« slow » mode
Repeat
This function can be used on a single track CD, on the whole disc, or on a programmed track.
1.
Press Repeat button during playback: the player will get into whole disc playback mode. All
the tracks will be repeated
2.
Press a second time: the player will only repeat the track playing.
3.
Press a third time, and the player will go back to normal playing mode.
