Page 9
Vectaire Ltd, Lincoln Road, Cressex Business Park, High Wycombe, Buckinghamshire, HP12 3RH
Tel: +44 (0)1494 522333. Fax: +44 (0)1494 522337. Email: [email protected]
WHHR125DC-Aera
060312
E & O.E
Cleaning and Maintenance
WARNING: The unit uses a 230V supply and contains rotating
mechanical parts.
Before carrying out any maintenance or cleaning operations the
mains electrical supply MUST be disconnected
.
To clean the filters and heat exchanger:
The air filters and heat exchanger of the Vectaire WHHR125DC- Aera
should be cleaned regularly by a suitably qualified person (the frequency
of cleaning will vary depending on the installation environment).
•
Remove the access panel
•
Slide out the filters that are fitted either side of the heat exchanger as
shown.
•
Clean the filters carefully using a vacuum cleaner.
•
Carefully remove any dust from the face of the heat exchanger using a
vacuum cleaner.
Never use water or any other fluids to clean the heat exchanger
•
Return the heat exchanger and filters to their original position.
•
Replace the front cover.
•
Power to the unit can now be restored.
Filter Replacement
Filters should be replaced annually or after a maximum of 3 cleaning cycles.
Replacement filters are available from Vectaire- - call us on +44 (0) 1494 522333 or via [email protected]
