Vecow VCM-1000, User Manual

Page: 30 / 109

22 ©Vecow VCM-1000 User Manual GETTING TO KNOW YOUR VCM-1000
2.2.12 PoE Ports (VCM-1100F)
DVI-D
VGA
WLAN
RST
LAN 2 LAN 1
V+ V
IGN On / Off
DC-IN 24V
LAN 6 LAN 5 LAN 4 LAN 3
COM 2
COM 1
Isolated DIO
20 1
40 21
There are 4 RJ45 connectors in the front side of VCM-1000. It supports IEEE 802.3at
(PoE+) Power over Ethernet (PoE) connection delivering up to 37W/54V per port and
1000BASE-T gigabit data signals over standard Ethernet Cat 5/Cat 6 cable.
Each PoE connection is powered by Intel ® I350 Gigabit Ethernet controller and
independent PCI express interface to connect with multi-core processor for
network and data transmit optimization. Only when PoE port starts to supply
power to power devices, the dedicated LED will be lightened.
PS. Suggest to use PoE function when power input is over 24V.
The pin-outs of LAN 3 and LAN 6 are listed as follows:
Each LAN port is supported by standard RJ-45 connector with LED indicators to
present Active/Link/Speed status of the connection.
Pin No. 10/100 Mbps 1000Mbps PoE
1 E_TX+ MDI0_P PoE+
2 E_TX- MDI0_N PoE+
3 E_RX+ MDI1_P PoE-
4 ----- MDI2_P -----
5 ----- MDI2_N -----
6 E_RX- MDI1_N PoE-
7 ----- MDI3_P -----
8 ----- MDI3_N -----