8
©Vecow UMBC-1100 User Manual
GETTING TO KNOW YOUR UMBC-1100
2.2 Front Panel I/O Functions
In Vecow's UMBC-1100 series family, all I/O connectors are located on the front
panel. Most of the general connections to the computer device, such as audio,
USB, RJ45,HDMI,Display Port, and any VGA, are placed on the front panel.
2.2.1 Audio Connector
There are two audio connectors, mic-in and line-out, on the front side of UMBC-1100.
Onboard Realtek ALC892 audio codec supports 5.1 channel HD audio and fully
complies with Intel
®
High Definition Audio (Azalia) specifications.
To utilize the audio function on the Windows platform, you need to install
corresponding drivers for both Intel
®
C246 chipset and Realtek ALC892 codec.
Please refer to chapter four for more details on driver installation.
2.2.2 10/100/1000 Mbps Ethernet Port
There are two 8-pin RJ-45 jacks supporting 10/100/1000 Mbps Ethernet
connections in the front side of UMBC-1100. LAN1 is powered by Intel
®
I219-LM
Ethernet engine; LAN2,LAN3 and LAN4 are powered by Intel
®
I211-AT Ethernet
engine. When both LAN1, LAN2,LAN3 and LAN4 work in normal status, basic
iAMT function is enabled.
Using suitable RJ-45 cable, you can connect UMBC-1100 system to a computer
or to any other devices with Ethernet connection, for example, a hub or a switch.
Moreover, LAN1,LAN2,LAN3 and LAN4 supports Wake on LAN and Pre-boot
functions. The pinouts of LAN1,LAN2,LAN3 and LAN4 are listed as follow :
