Vecow SPC-7000 User Manual Download

Page: 21 / 106

©Vecow SPC-7000/7100/7200 User Manual

GETTING TO KNOW YOUR SPC-7000

2.2.4 PWR, HDD, WWAN, WLAN LED Indicator

Yellow-HDD LED :

A hard disk LED. If the LED is on, it indicates that the

system's storage is functional. If it is off, it indicates that the system's storage is

not functional. If it is flashing, it indicates data access activities are in progress.

Green-Power LED :

If the LED is solid green, it indicates that the system is

powered on.

Green-WWAN LED :

If the LED is solid green, it indicates that the device on M2

key-B Socket is working.

Green-WLAN LED :

If the LED is solid green, it indicates that the device on M2

key-E Socket is working.

LED Color

Indication

System Status

Yellow

HDD

• On/Off : Storage is functional or not

• 2.Twinkling : Data transferring

Green

POWER

System power is on or off

Green

WWAN

Device is working or not

Green

WLAN

Device is working or not

2.2.5 DisplayPorts

DisplayPort connection supports up to 4096 x 2304 resolution at 60Hz.

Summary of Contents for SPC-7000











































































































Search results

Summary of Contents for SPC-7000

Reviews:

Related manuals for SPC-7000

Brands by name

Popular brands

Vecow SPC-7000, User Manual

Search results

Summary of Contents for SPC-7000

Reviews:

Related manuals for SPC-7000

Brands by name

Popular brands