30
©Vecow MIG-2000 User Manual
GETTING TO KNOW YOUR MIG-2000
2.5.1 ATX Power Switch Jumper
This jumper allows you to select ATX power mode.
1
2-3 Close : ATX mode. (Default)
2.5.2 COMA /COMB PW (Serial Port Header Power Select Jumpers)
The power select jumpers are used to select serial port power.
1
1-2 Close : Set to 12V.
1
2-3 Close : Set to 5V. (Default)
2.5.3 LCD_VCC (LVDS Drive Voltage Jumper)
This jumper can be used to provide different screen voltage settings.
1
2-3 Close : Set to 5V.
1
1-2 Close : Set to 3V. (Default)
2.5.4 CLR_CMOS (Clear CMOS Jumper)
Use this jumper to clear the BIOS configuration and reset the CMOS values to
factory defaults. To clear the CMOS values, use a metal object like a screwdriver
to touch the two pins for a few seconds.
Short : Clear CMOS Values
Open : Normal