Vecow GPC-1000MX, User Manual, Page: 86 / 111

80 ©Vecow GPC-1000MX User Manual BIOS SETUP
4.4.2.2 SATA and RST Configuration
SATA Controller(s)
Enable/Disable SATA Device.
SATA Mode Selection
Determines how SATA controller(s) operate.
Software Feature Mask Configuration
RST Legacy OROM/RST UEFI driver will refer to the SWFM configuration to
enable/disable the storage features.
Aggressive LPM Support
Enable PCH to aggressively enter link power state.
Port n
Enable or Disable SATA Port.
Hot Plug
Designates this port as Hot Pluggable.
Spin Up Device
If enabled for any of ports Staggerred Spin Up will be performed and only the
drives which have this option enabled will spin up at boot. Otherwise all drives
spin up at boot.
SATA Device Type
Identify the SATA port is connected to Solid State Drive or Hard Disk Drive.
Figure 4-4-2-2 : SATA And RST Configuration