86
BIOS AND DRIVER
©Vecow EVS-2000 User Manual
4.3.13 Network Stack Configuration
Figure 4-3-13 : Network Stack Settings
Network Stack
Enable/Disable UEFI Network Stack.
Ipv4 PXE Support
Enable/Disable IPv4 PXE boot support.
Ipv4 HTTP Support
Enable/Disable IPv4 HTTP boot support.
Ipv6 PXE Support
Enable/Disable IPv6 PXE boot support.
Ipv6 HTTP Support
Enable/Disable IPv6 HTTP boot support.
IP6 Configuration Policy
Set IP6 Configuration Policy.
PXE boot wait time
Wait time to press ESC key to abort the PXE boot.
Media detect count
Number of times presence of media will be checked.
4.3.14 AMC6821 Configuration
Figure 4-3-14 : AMC6821 Settings
Fan1 Speed
There are three level for Fan1 Control.
[High/Middle/Low]
Summary of Contents for EVS-2000 Series
