Vecom EPBC-1000, User Manual

Page: 40 / 73

34 ©Vecow EPBC-1000 User Manual BIOS SETUP
4.3.2.2 GT - Power Management Control
Figure 4-3-2-2 : GT - Power Management Control
RC6(Render Standby)
Check to enable render standby support.
Maximum GT frequency
Maximum GT frequency limited by the user. Choose between 200MHz (RPN)
and 750MHz (RP0). Value beyond the range will be clipped to min/max
supported by SKU.
Disable Turbo GT frequency
Enabled: Disables Turbo GT frequency. Disabled: GT frequency is not limited.
4.3.3 PCH-FW Configuration
Figure 4-3-3 : PCH-FW Configuration
ME State
CWhen Disabled ME will be put into ME Temporarily Disabled Mode.
Race To Halt (RTH)
Enable/Disable Race To Halt feature. RTH will dynamically increase CPU
frequency in order to enter pkg C-State faster to reduce overall power. (RTH is
controlled through MSR 1FC bit 20).
Turbo Mode
Enable/Disable processor Turbo Mode (requires EMTTM enabled too). AUTO
means enabled.
C states
Enable/Disable CPU Power Management. Allows CPU to go to C states when
it's not 100% utilized.