26
©Vecow ECX-2600A/2400A/2300A PEG User Manual
GETTING TO KNOW YOUR ECX-2600A/2400A/2300A PEG
2.2.9 Ethernet Port
1
8
There are 2 8-pin RJ-45 jacks supporting 10/ 100/1000 Mbps Ethernet
connections in the front side. LAN 1 is powered by Intel i219 Ethernet Phy; LAN
2 is powered by Intel I210 Ethernet engine. When both LAN 1 and LAN 2 work
in normal status, iAMT 11.0 function is enabled.
Using suitable RJ-45 cable, you can connect the system to a computer, or to
any other devices with Ethernet connection, for example, a hub or a switch.
Moreover, both of LAN 1 and LAN 2 supports Wake on LAN and Pre-boot
functions. The pin-outs of LAN 1 and LAN 2 are listed as follows:
Pin No.
10/100 Mbps
1000Mbps
1
E_TX+
MDI0_P
2
E_TX-
MDI0_N
3
E_RX+
MDI1_P
4
----
MDI2_P
5
-----
MDI2_N
6
E_RX-
MDI1_N
7
-----
MDI3_P
8
------
MDI3_N
LED Location LED Color
10Mbps
100Mbps 1000Mbps
Right
Green/
Orange
Off
Solid
Green
Solid
Orange
Left
Green
Twinkling
Green
Twinkling
Green
Twinkling
Green
Each LAN port is supported by standard RJ-45 connector with LED indicators to
present Active/ Link/ Speed status of the connection.
The LED indicator on the right bottom corner lightens in solid green when the cable
is properly connected to a 100Mbps Ethernet network; The LED indicator on the right
bottom corner lightens in solid orange when the cable is properly connected to a
1000Mbps Ethernet network; The left LED will keep twinkling/off when Ethernet data
packets are being transmitted/received.
